Mr McKenic® – Clear Polyacrylate Coating is a protective spray that acts as a barrier to protect surfaces
against moisture, air, harmful sun rays, industrial fumes and other environmental pollutants which act as catalysts for rust & corrosion.
| Brand | Mr Mckenic |
|---|---|
| Industries | AFTER MARKET REPAIR SERVICES, AUTOMOTIVE, AVIATION, DEFENCE, GENERAL INDUSTRY, HEAVY INDUSTRY, OIL & GAS, POWER, RAILWAYS, SHIP BUILDING |
Benefits
- Prevents Growth of Algae/Slime
- Contains Corrosion Inhibitors
- Reduces Corrosion and Scale Build-Up
- Non-Toxic
- Fast Cleaning Action
- 2-3 Month Effectiveness
- Eliminates Bacteria-causing Diseases
- Prevents Clogging and Over-flowing
PROPERTIES
- Physical State : Liquid
- Colour : Clear
- pH Value : Not Applicable
- Solubility (In Water) : Insoluble
- Density : 0.90 ± 0.03kg/m3
DIRECTIONS
Surface Preparation:
Remove all existing oils, dirt, rust and other contaminants from the surfaces. Ensure surface is dry before application.
For Aerosol Packing:
1. Shake can well before use.
2. Spray Mr McKenic®- Clear Polyacrylate Coating by holding the can 20-25cm from target surfaces.
3. Allow film to be semi-dry before applying a second layer of coating.
4. Leave it for at least 8 hours to allow coating to be fully cured.
Note: Always test on a small area when used for the first time on a new surface.
Drying Time : 45 to 60 minutes at 30°C.
Coverage : 1 Aerosol Can can cover approximately 2 square meters for a single layer coat.
For Bulk Packing, refer to Mr McKenic®- PC8012 Pro-GuardTM
Removal : Mr McKenic® - Clear Polyacrylate Coating can be removed from equipment or tools by using solvent cleaners such as Mr McKenic°- Mould & Metal Cleaner.
